LAND ROVER DEFENDER 110 L663 (2020-CURRENT) SLIMLINE II ROOF RACK CONTOUR KIT

$1,344.00 USD
Shipping calculated at checkout.

LAND ROVER DEFENDER 110 L663 (2020-CURRENT) SLIMLINE II ROOF RACK CONTOUR KIT


Description

Gear up for any adventure with the Slimline II Roof Rack. This rugged, off-road tough roof rack was designed to fit perfectly on your Land Rover Defender 110 L663. It is highly versatile and boasts a unique modular design that allows you to customize it with a wide range of accessories and increase your load-hauling capacity. This particular roof rack kit includes 4 Contour Rails providing a sturdy, aesthetic base for your rack.

This 1762mm/69.4” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Contour Rails to mount the Slimline II Tray to your Land Rover Defender 110 L663. Easily installs using the existing factory rails. No drilling is required.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific contour rails have openings for storing compatible gear under the rack such as Front Runner tables.

An opening on the Contour Rails allows access to Front Runner under rack mount table (Pro Stainless Steel Prep Table Kit).

All Front Runner Racks are backed by a Limited Lifetime Warranty*

KRLD042T - Land Rover Defender 110 L663 (2020-Current) Slimline II Roof Rack Contour Kit


Consisting of:
1x FALD012 - Land Rover Defender L663 (2020-Cur) Contour Rail
1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)


Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel


Approximate Installed Weight: 27.7kg (61.07lbs)


The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.


To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.


If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.


If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.


Shipping Dimensions:
Width: 450mm (18")
Length: 1720mm (68")
Height: 275mm (11")


Shipping Weight:
Weight: 32kg (70lbs)

Reviews (0)

LAND ROVER DEFENDER 110 L663 (2020-CURRENT) SLIMLINE II ROOF RACK CONTOUR KIT - BaseCamp Provisions
Front Runner

LAND ROVER DEFENDER 110 L663 (2020-CURRENT) SLIMLINE II ROOF RACK CONTOUR KIT

$1,344.00 USD

Gear up for any adventure with the Slimline II Roof Rack. This rugged, off-road tough roof rack was designed to fit perfectly on your Land Rover Defender 110 L663. It is highly versatile and boasts a unique modular design that allows you to customize it with a wide range of accessories and increase your load-hauling capacity. This particular roof rack kit includes 4 Contour Rails providing a sturdy, aesthetic base for your rack.

This 1762mm/69.4” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Contour Rails to mount the Slimline II Tray to your Land Rover Defender 110 L663. Easily installs using the existing factory rails. No drilling is required.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific contour rails have openings for storing compatible gear under the rack such as Front Runner tables.

An opening on the Contour Rails allows access to Front Runner under rack mount table (Pro Stainless Steel Prep Table Kit).

All Front Runner Racks are backed by a Limited Lifetime Warranty*

KRLD042T - Land Rover Defender 110 L663 (2020-Current) Slimline II Roof Rack Contour Kit


Consisting of:
1x FALD012 - Land Rover Defender L663 (2020-Cur) Contour Rail
1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)


Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel


Approximate Installed Weight: 27.7kg (61.07lbs)


The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.


To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.


If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.


If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.


Shipping Dimensions:
Width: 450mm (18")
Length: 1720mm (68")
Height: 275mm (11")


Shipping Weight:
Weight: 32kg (70lbs)

View product