DOBINSONS FRONT UPPER CONTROL ARM KIT (UCA'S) FOR TOYOTA FJ CRUISER, 4RUNNER 2003 TO 2021 AND LEXUS GX470, GX460 (UCAKIT-002K)

$785.00 USD
Shipping calculated at checkout.

DOBINSONS FRONT UPPER CONTROL ARM KIT (UCA'S) FOR TOYOTA FJ CRUISER, 4RUNNER 2003 TO 2021 AND LEXUS GX470, GX460 (UCAKIT-002K)

Description
  • Complete kit for both left and right hand side, includes new ball joints (Pressed), OE style rubber frame bushings (installed), and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2") wall thickness, and powder coated black
  • Works for any lift height of 1.5" or more. Any height less than that, a proper wheel alignment may not be able to be achieved
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • For replacement ball joints click (HERE)
  • For replacement bushings click (HERE)
  • Includes
    • UCA59-002K (Pair)
    • BJ59-001 (Pair)
    • Pressing Service

Instructions



    --
    Dobinsons front upper control arm set. This will ONLY work on a vehicle lifted 1.5" or more, due to the built-in 3 degrees of caster. This will fit 4th Gen 4Runners 2003-2009, 5th Gen 4Runners 2010-2019, Lexus GX470 2003-2009 and Lexus GX460 2010 to 2019 and all generations of Toyota FJ Cruiser (FJC). These will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary.

    Reviews (0)
    DOBINSONS FRONT UPPER CONTROL ARM KIT (UCA'S) FOR TOYOTA FJ CRUISER, 4RUNNER 2003 TO 2021 AND LEXUS GX470, GX460 (UCAKIT-002K) - BaseCamp Provisions
    Dobinsons

    DOBINSONS FRONT UPPER CONTROL ARM KIT (UCA'S) FOR TOYOTA FJ CRUISER, 4RUNNER 2003 TO 2021 AND LEXUS GX470, GX460 (UCAKIT-002K)

    $785.00 USD
    • Complete kit for both left and right hand side, includes new ball joints (Pressed), OE style rubber frame bushings (installed), and washers
    • Has 3 degrees of caster built in, no adjustability or settings required
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2") wall thickness, and powder coated black
    • Works for any lift height of 1.5" or more. Any height less than that, a proper wheel alignment may not be able to be achieved
    • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
    • For replacement ball joints click (HERE)
    • For replacement bushings click (HERE)
    • Includes
      • UCA59-002K (Pair)
      • BJ59-001 (Pair)
      • Pressing Service

    Instructions



      --
      Dobinsons front upper control arm set. This will ONLY work on a vehicle lifted 1.5" or more, due to the built-in 3 degrees of caster. This will fit 4th Gen 4Runners 2003-2009, 5th Gen 4Runners 2010-2019, Lexus GX470 2003-2009 and Lexus GX460 2010 to 2019 and all generations of Toyota FJ Cruiser (FJC). These will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary.

      View product
      Back to top